Making straw logs

How To Grow Mushrooms on Straw Logs

Growing mushrooms on straw is one of the easiest and most rewarding ways to produce food at home.

You could start with a mushroom kit – or even better- make your own mushroom log and grow mushrooms at home. With little equipment or supplies you could be growing more delicious gourmet mushrooms than you will know what to do with!

The process involves inoculating pasteurized straw with mushroom grain spawn, allow the mushrooms to colonize the straw and placing your mushroom log the right environmental conditions for fruiting.

Basic Steps for Growing on Straw

    1. Chop, soak and pasteurize straw between 65-82 °C for 1 -2 hours.
    2. Drain straw, cool, and mix in mushroom grain spawn with at least a 10% spawn ratio.
    3. Stuff straw / spawn mixture into an appropriate fruiting container.
    4. Let colonize at room temperature. This should take 7-14 days.
    5. Move to a fruiting chamber or some other appropriate environment to initiate mushroom fruitbody growth.
    6. Harvest and enjoy!

What You’ll Need

      • Straw, either wheat straw or oat straw in reasonably good condition.
      • A Pasteurization Method. I like to use a propane burner and a large drum.
      • Mushroom Grain Spawn. Make sure to choose a mushroom species that grows well on straw such as Oyster Mushrooms.
      • A Fruiting Container such as poly tubing or a 5 gallon bucket with holes drilled into the sides

Step 1: Choosing your mushroom

What types of mushrooms can you grow at home using straw?

Many different types of mushrooms will grow on straw, but the most rewarding type to grow is oyster mushrooms. They are easy to grow, colonize fast, and fruit heavily. Oyster mushrooms come in many different forms including blue, pink, yellow, pearl, and king oysters.

All have slightly different environmental preferences, and some will be more productive or faster on straw then others. Most gourmet mushrooms grow great on supplemented sawdust as well – you can read all about that here.

Blue Oysters will colonize straw quickly and fruit heavily, but require a ton of fresh air in order to develop large meaty caps. This makes them best suited for outdoor grows with unlimited fresh air. They prefer cooler weather and are generally suited to more temperate climates.

Yellow Oysters do not require nearly as much fresh air as blues and are thus well suited for growing indoors. They are a tropical species and will grow fine at room temperature. The yield will be smaller than other varieties as this mushroom produces light and delicate- but beautiful- bouquets of vibrantly yellow mushrooms.

Pink Oysters are incredibly fast to fruit, usually ready for harvest within 10-12 days of making the straw log. They are heat tolerant and don’t require much fresh air. The spore load can be quite heavy with these mushrooms requiring a keen eye for the right time to harvest.

King Oysters will grow well on straw, but look notably different than other varieties. They may take a little longer to fruit as well. This species tends to produce large individual mushrooms rather than clusters. If grown inside they will tend to have large stems and small caps, while outside grows produce large caps and very little stem. Both forms are desirable.

Once you have decided what species you want, you can either order spawn or make your own. Making your own grain spawn requires some knowledge and special equipment, but is a fun and rewarding experience in itself.

The easiest way to do it, however, is to purchase spawn from a reputable supplier. You will need about 3-6 lbs of fully colonized spawn for each 30lb straw log.


Check out this video below where I go through my process for making and inoculating straw logs:


Step 2: Prepare the straw

Chop the straw

You can use a variety of straws for growing mushrooms, but wheat or oat straw seems to work best. Once you get your bale of straw, it is best to chop the straw into smaller 1-3″ pieces. For smaller amounts you can use shears in a large tote, but if doing larger amounts, i find it easiest to use a weed whacker in a large barrel to shred a few armloads of straw at a time.

Choping straw for mushroom log

Wash and soak
This step can be skipped but I find it advantages to soak the straw with dish soap in a large tote. Use about the same amount you would use to do dishes. It seems to reduce the bacterial load in the straw and reduce the chances of contamination.

Pasteurize
In order to give the mushrooms the advantage over molds and bacteria, you need to heat treat the straw within a specific temperature range. Proper pasteurization will essentially allow the mushroom culture a window of opportunity to colonize the straw before contamination can get a foothold. The easiest way to do this is using a hot water bath.

For smaller amounts of straw, load a tote with you straw and add hot tap water. Add a weight on top of the straw to hold it down. Once the straw is covered, add boiling water until the water temperature is above 65 degrees Celsius. Use a candy thermometer to monitor the temperature. Let the straw sit in the hot water bath for 1-2 hours. Add more boiling water if the temperature falls below 65 degC.

For larger amounts of straw you can use a food grade barrel with a propane burner. This is the one I use. It gets the water cookin’ in about 30 minutes. Stuff a wire basket with straw, place in the barrel, fill with water and heat until the temperature rises above 65 degC. Try to maintain the temperature between 65 an 82 degC for 1-2 hours.

Pastuerizing a straw log for graoing mushrooms.
Pasteurized straw draining and cooling.

Drain and Cool
Once proper pasteurization is complete, drain your straw and allow it to fully cool. Rapid cooling can be obtained by spreading the straw out on a smooth clean table. Try to maintain cleanliness here by washing the surface thoroughly and by disinfecting hands with alcohol or washing well and often. Pay close attention to where contaminants could come from.

Step 3: Inoculate the logs

In this step you add your grain spawn to the straw. Using a higher spawn:straw ratio will increase colonization times and will increase your chances of success. I like to use 3lbs of spawn for each 20lbs of wet straw, or a ratio of about 15%. Using less than 10% greatly increases the chances of contamination.

Mix your spawn
Using a large tote, or table, mix your straw and spawn well. Try to get an even and thorough distribution. Also, make sure there are no pockets of packed straw that are still too hot from pasteurization. Again, make sure hands are disinfected or use nitrile gloves.

Stuff mixture into bags or container

You now need to stuff the mixture into a suitable container. Many things will work, including laundry baskets, 5 gallon buckets with holes drilled in the side, plastic bags ect. I find the best option for a container is to use poly tubing – its versatile, you can watch colonization, easily spot contaminants and make the log any length you want. Also, the shape of the tubing allows for lots of surface area for fruiting, you can slice as many holes as you want and even cut holes if you notice unwanted pinning under the plastic. Using poly tubing with a 16″ lay flat diameter will give you a log about 10.5 inches thick, which is a perfect size. Going to much bigger will cause an anaerobic core, eventually causing the log to contaminate.

Tie one end of the tubing with wire or a zip tie and stuff the mixture in one handful at a time. Press down as you go and pack the straw as tight as you possibly can. This will prevent air pockets from forming between the straw and the tubing -thus preventing the mushrooms from pinning under the plastic. Once the log is a desired length, force all the air out of the log by pressing down hard and twisting the top of the tubing. Tie off the top again with wire or a zip tie.

Punch holes for fruiting
You will need to punch holes into the side of the log for two reasons. First, your mushroom log needs to breath in order for colonization to occur. If no holes are punched, contamination is imminent. Further, your mushrooms will eventually fruit through these holes. It is similar to how they grow in nature. The plastic acts like the bark on a tree protecting the mushrooms, while the holes act like cracks in the bark where the organism senses fresh air and an opportunity to fruit and eventually spread spores.

Use a blade to cut small x’s about 5 inches apart all around the entire bag. You can also use an arrowhead for faster hole punching. Make sure the blade or arrowhead is sanitized first with alcohol so that you are not introducing contaminants into the log. If you plan on hanging the log, also poke a few holes in the bottom of the log so that excess moisture can drip out.

16

16″ Poly tubing is great for making straw logs.

Packed mushroom straw log
Mushroom straw log in grow room

Step 4: Colonization and fruiting

At this point the hard work is behind you! It should take about 7-14 days for the mushroom culture to fully colonize the log depending on temperature. Logs are best incubated at room temperature and away from direct sunlight. Check you logs every couple of days to ensure colonization is proceeding and contamination is kept at bay. If doing multiple logs, make sure that they are not packed tightly together during incubation. They create heat as they are colonizing, and if they get to warm the mushroom culture will die and the log will contaminate. If you notice any bad smells, or colorful growth in your log, then it is likely contaminated, and it would be best to throw it in a compost pile or in the garbage. Most likely, however, you will only see nice white mycelial growth.

Once the entire log is covered in white mycelium it is ready to fruit. If in the right conditions, or outside, fruiting will likely occur naturally. You will first see pins or little adolescent fruit bodies forming at the holes in the plastic. These mushroom fruit bodies will grow quite fast, sometimes doubling in size every day! Try not to let the mushrooms dry out as they grow, which can be accomplished with regular misting.

If growing inside you may need to induce fruiting by altering the environmental conditions- namely introducing light, slightly dropping the temperature and elevating the humidity. You may need to build a grow chamber to maintain perfect conditions, but successful indoor grows can be achieved at normal living area conditions if a regular misting schedule is maintained. There are many different options for indoor growing chambers, and may need to be explored in another post.

Contaminated straw log.

Healthy white mycelial growth, with baby king oysters emerging from a hole in the plastic.

Healthy white mycelial growth, with baby king oysters emerging from a hole in the plastic.

Primordial oyster mushrooms emerging through the log.

Youngs Blue oyster cluster. These mushrooms tend to lose their blue hue as they age.

Step 5: Harvest!

Congratulations! its now time to enjoy the fruits of your labor. Time to harvest will likely be about 10-21 days after you have inoclated your log, depending on the species. Try to harvest your oyster mushrooms right before they drop spores. You will know they are ready to drop spores when the caps start to curl upwards. If the mushrooms appear to have a powder all over them, they have likely already dropped there spores. This is fine, but some people can develop an allergic reaction to oyster spores over time, so its best not to have too high a spore load, especially if growing indoors. Remove mushroom cluster from your log at the base of the cluster with a knife, or simply twist off with your hand. You can usually get about 5 lbs of mushrooms from a 20 lb log, depending on species.

King oyster mushroom on straw

King oysters ready for harvest. King’s generally form large individual mushrooms.

Blue oyster mushroom on straw

Blue oysters showing the long stem and smaller caps from being grown indoors. More fresh air would cause the caps to form sooner, shortening the stems.

BAby Pink Oyster Mushrooms on straw

Young pink oyster clusters on a straw log.

Pink Oyster mushrooms on straw

Pink oysters about 12 hours past ideal harvest. Some had already dropped spores.

After harvest, leave your log to rest for a week or so. You will likely get 1-2 more flushes of mushrooms if the log can retain adequate moisture. Monitor your log closely after the first harvest, since contamination can occur as the log matures. Once it is clear that the log is done, simply break it up and add it the compost pile, or add to your garden as a mulch. You might even get more mushrooms out of it!

Let mushrooms dry slightly, and then store in the fridge in paper towel or paper bags for up to two weeks.

TOOLS I USE FOR BEST RESULTS:

(links to Amazon)

Pressure Sterilizer: Required for sterilizing grains for making grain spawn.

Propane Burner: Heats up water for pasteurization. Way easier than boiling water on a stove.

Poly Tubing: The Best Way to Make Straw Logs.

Spread the spores!

Looking for more?

28
Leave a Reply

avatar
15 Comment threads
13 Thread replies
0 Followers
 
Most reacted comment
Hottest comment thread
16 Comment authors
GeoffAshleyTonyjojodale sarver Recent comment authors
  Subscribe  
newest oldest most voted
Notify of
Chris
Guest
Chris

I have been to two different home depots, and they have no idea what “poly tubing” even is. Where do you get yours?
Follow-up question: if using a plastic bin for a fruiting chamber, how large (and shape) would you drill the holes? The picture of the orange bucket looks like it’s showing 1/2″ holes.
Thanks!

Meghan Vesey
Guest
Meghan Vesey

Uline.ca has every possible plastic bag size… including many types of poly tubing! Just watch what kind of plastic it is if you are heating it up.

Jaco
Guest
Jaco

Hi Tony. In one of the pics there is some green stuff between the straw and mycelium. I have some logs with the same stuff in. Contamination came to mind. I thought of chucking it away, but then for some reason I did not. Now the once dark green spots is getting lighter, as if the mycelium are growing over it, and still keeps on colonizing. Will the mycelium get the upper hand over this molt-like stuff? Will it fruit as normal? Thanks for the great post.

Niels
Guest
Niels

Hi Tony ! I was wondering how do you decide which poly tubing diameter to use ? On your picture we can see beautiful pink oysters growing and I have never seen so many of them on similar hangning methods. Also it’s also the first time I see such a big diamater. I imagine it is related… Do you know what is the optimal diameter size in order not to use to much substrate but to get the maximum mushroom quantity ? Also on another article you mention the fact that with pink oyster we need to be careful with… Read more »

Will
Guest
Will

Hey Tony,

I have been watching all your videos and reading all i can. Trying to run some numbers and I didn’t know how many logs you can make out of a 50 lb bale of straw. Also what is your average lb of mushrooms out of a log, I know that there are lots of variables but if you could guess an average what would you say,

Thanks and keep up the good work

Will

Evon Leach
Guest
Evon Leach

I have a question. Can you use timothy straw to grow brown oyster mushrooms?
Or, can you use oat straw and as wheat berrys to give the spawn the nutrition to use for food. I have grown Golden, Pink and PoHo oysters with good success.

supa bu
Guest
supa bu

Hi tony,
Are there any other ingredients besides straw? Like rice flour, calcium …
.

Thanks for the knowledge.

Karol
Guest
Karol

Great website ! I’m reading every article few times and many others on internet to know as much as I can about this great hobby/business. I have already in my mind how I want to sell them , how to introduce my product to people , where I want to sell them . I love eating mushrooms and I will show it to other people also in summer time I would like to grow my own eco vegetables as compost I’ll use straw substrate that is not longer good enough .

Jason Maxwell
Guest
Jason Maxwell

Hi Tony

I have followed similar methods growing on straw, are you using an additional supplements?

Toni Reynolds
Guest
Toni Reynolds

Hi Tony,
I was wondering if you might be able to answer a troubleshooting question for me? I have my grow chamber in my spare bedroom with a humidifier in it and everything was going great with misilium throughout the bags but now the 2″ – 3″ pins are not growing anymore and looks to be shriveling up. I open the zippers to the “green house” everyday and it looks to have plenty of moisture in there…. any ideas what’s going on? I inoculated my pasteurized straw on 6/8.

Tina
Guest
Tina

Hi Tony,
I was wondering where is the best place to buy the mushroom spawn?
Thanks for the great articles!

dale sarver
Guest
dale sarver

Is it possible to add a little soaked and sterilized hardwood pellets to the pasteurized straw to add some nutrients and get more mushrooms? I am growing in buckets.

jojo
Guest
jojo

Hello sir.. based on your experience is it more productive if i used the cold pasteurization method.. thnx

Ashley
Guest
Ashley

I found your site because I have a straw bale that I’m growing herbs in. I had seen this way of growing things on You Tube and thought I would give it a try. Herbs are growing great. Lots of small brown mushrooms are growing as well. The sun kills many of them , by the end of the day. Would this be a mushroom to eat. I know nothing about mushrooms. If you have any advice or info as to what kind of mushroom are growing on my bales it would be so helpful. I live in Lubbock Texas… Read more »

Geoff
Guest
Geoff

and folks can check out the lime pasteurization vid if they don’t have a burner. Nice article.